| None. |
|
Returns the viewport x coordinate produced by the most recent CameraProject call. Use it (with ProjectedY) as the 2D position for drawing labels, health bars or markers over 3D objects. Check ProjectedZ first: if it is 0 the projected point was behind the camera or out of range and the x value is meaningless. The coordinate is relative to the camera's viewport, which covers the whole screen for a default camera. See also: CameraProject, ProjectedY, ProjectedZ. |
; ProjectedX Example
; ------------------
Graphics3D 640,480,0,2
SetBuffer BackBuffer()
camera=CreateCamera()
PositionEntity camera,0,2,-10
light=CreateLight()
RotateEntity light,45,45,0
; Textured ground plane
plane=CreatePlane()
ground_tex=LoadTexture("media/MossyGround.BMP")
ScaleTexture ground_tex,4,4
EntityTexture plane,ground_tex
; A drone that circles the scene - we will pin a HUD tag on it
drone=CreateSphere()
EntityColor drone,100,200,255
angle#=0
While Not KeyDown(1)
; Fly the drone in a bobbing circle
angle=angle+1
PositionEntity drone,Cos(angle)*6,2+Sin(angle*3),Sin(angle)*6
; Arrow keys move the camera
If KeyDown(200) Then MoveEntity camera,0,0,0.1
If KeyDown(208) Then MoveEntity camera,0,0,-0.1
If KeyDown(203) Then TurnEntity camera,0,1,0
If KeyDown(205) Then TurnEntity camera,0,-1,0
; Project the drone's 3D position into 2D screen coordinates
CameraProject camera,EntityX(drone),EntityY(drone),EntityZ(drone)
RenderWorld
; Draw a HUD tag at the projected screen position while the drone is on screen
If EntityInView(drone,camera) Then
Rect ProjectedX()-20,ProjectedY()-20,40,40,False
Text ProjectedX()-16,ProjectedY()-36,"DRONE"
EndIf
Text 0,0,"Arrow keys: move camera Esc: exit"
; ProjectedX() returns the screen x coordinate of the last CameraProject
Text 0,20,"ProjectedX: "+ProjectedX#()
Text 0,40,"ProjectedY: "+ProjectedY#()
Text 0,60,"ProjectedZ: "+ProjectedZ#()
Flip
Wend
End