I have written a nice GUI for avrdude. Now i have a problem. If i use the TProcess to start avrdude in terminal the STDOUTPUT shows me not all.
AVR device initialized and ready to accept instructions
Device signature = 0x1e9502
"efuse" memory type not defined for part "ATMEGA32"
AVR device initialized and ready to accept instructions
Device signature = 0x1e9502
reading lfuse memory:
writing output file "<stdout>"
->HEX VALUE MISSING
AVR device initialized and ready to accept instructions
Device signature = 0x1e9502
reading hfuse memory:
writing output file "<stdout>"
0xd9
done.
AVR device initialized and ready to accept instructions
Device signature = 0x1e9502
"ffuse" memory type not defined for part "ATMEGA32"
done.
Has anyone the same problem?
Don't know the avrdude, but do you read out both TPipeStream from TProcess (error and pipe)?
May post some code...
Yes i do. Here is the Codesample:
If ButtonState(erase)= True Then
SetButtonState(erase,False)
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" -e")
While Process.Status()
If Process.err.ReadAvail() Or Process.pipe.ReadAvail() Then
linepipe = Process.pipe.ReadLine().Trim()
lineerro = Process.err.ReadLine().Trim()
If linepipe <> "" Then
AddTextAreaText(textarea , linepipe+Chr$(13))
EndIf
If lineerro <> "" Then
AddTextAreaText(textarea , lineerro+Chr$(13))
EndIf
EndIf
Wend
EndIf
If ButtonState(fusebit)=True Then
SetButtonState(fusebit,False)
' read efuse
fmode1="-Uefuse:r:"
filename$="-"
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" "+fmode1+filename$+":h")
While Process.Status()
PollSystem()
If Process.err.ReadAvail() Or Process.pipe.ReadAvail() Then
linepipe = Process.pipe.ReadLine().Trim()
lineerro = Process.err.ReadLine().Trim()
If linepipe <> "" Then
Print linepipe
AddTextAreaText(textarea , linepipe+Chr$(13))
EndIf
If lineerro <> "" Then
Print lineerro
AddTextAreaText(textarea , lineerro+Chr$(13))
EndIf
EndIf
Wend
' read lfuse
fmode1="-Ulfuse:r:"
filename$="-"
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" "+fmode1+filename$+":h")
While Process.Status()
PollSystem()
If Process.err.ReadAvail() Or Process.pipe.ReadAvail() Then
linepipe = Process.pipe.ReadLine().Trim()
lineerro = Process.err.ReadLine().Trim()
If linepipe <> "" Then
Print linepipe
AddTextAreaText(textarea , linepipe+Chr$(13))
EndIf
If lineerro <> "" Then
Print lineerro
AddTextAreaText(textarea , lineerro+Chr$(13))
EndIf
EndIf
Wend
' read hfuse
fmode1="-Uhfuse:r:"
filename$="-"
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" "+fmode1+filename$+":h")
While Process.Status()
PollSystem()
If Process.err.ReadAvail() Or Process.pipe.ReadAvail() Then
linepipe = Process.pipe.ReadLine().Trim()
lineerro = Process.err.ReadLine().Trim()
If linepipe <> "" Then
Print linepipe
AddTextAreaText(textarea , linepipe+Chr$(13))
EndIf
If lineerro <> "" Then
Print lineerro
AddTextAreaText(textarea , lineerro+Chr$(13))
EndIf
EndIf
Wend
' read ffuse
fmode1="-Uffuse:r:"
filename$="-"
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" "+fmode1+filename$+":h")
While Process.Status()
PollSystem()
If Process.err.ReadAvail() Or Process.pipe.ReadAvail() Then
linepipe = Process.pipe.ReadLine().Trim()
lineerro = Process.err.ReadLine().Trim()
If linepipe <> "" Then
AddTextAreaText(textarea , linepipe+Chr$(13))
Print linepipe
EndIf
If lineerro <> "" Then
AddTextAreaText(textarea , lineerro+Chr$(13))
Print lineerro
EndIf
EndIf
Wend
EndIf
Any idea?
You don't set the console output flag, that could be the problem.
Instead of:
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" -e")
try:
Process:TProcess = CreateProcess(AppDir$+"/MacAVR.app/contents/MacOS/avrdude -q -C"+avrconfig+" -c"+prog$[id]+" -p"+parta$[chip]+" -e", 1 )
Cool AVR freaks live on these forums!
Cool, that was the problem, thanx.
Yes @ LAB, i am making Hardware with AVR Comntroller and i am working
on a GUI for avrdude. I have avrdude adapted for use with Blitzmax.