Please test this

Graphics3D 800, 600
SetBuffer BackBuffer()

Cam = CreateCamera()
MoveEntity Cam, 0, 0, -10

Mesh = CreateMesh()
Surf = CreateSurface(Mesh)

For i = 1 To 500
	V = CreateQuadVerts%(Surf)
	CreateQuadTris%(Surf, V)
Next
	
While Not KeyHit(1)

	RenderWorld()

	Framecounter_counter=Framecounter_counter+1
	If Framecounter_time=0 Then Framecounter_time=MilliSecs()
	If Framecounter_time+1001< MilliSecs() Then
		Framecounter_framerate=Framecounter_counter
		Framecounter_counter=0
		Framecounter_time=MilliSecs()
	EndIf

	Text 10,10,"fps: "+Framecounter_framerate
	
	Flip False
Wend

Function CreateQuadVerts%(Surf%)

	If Surf = 0 Then Return ;ERROR CHECK

	;Top left vert
	v1 = AddVertex(Surf, -.5, .5, 0, 0, 0)
	;Top right Vert
	AddVertex(Surf, .5, .5, 0, 1, 0)
	;Bottom left vert
	AddVertex(Surf, -.5, -.5, 0, 0, 1)
	;Bottom right vert
	AddVertex(Surf, .5, -.5, 0, 1, 1)
	Return v1
	
End Function


Function CreateQuadTris%(Surf%, Vert%)

	t1 = AddTriangle(Surf, Vert, Vert+1, Vert+2)
	t2 = AddTriangle(Surf, Vert+2, Vert+1, Vert+3)

	Return t1
	
End Function

If you can all post FPS ratings I will appreciate it greatly.

Computer specs as well if possible :)

A steady 851, specs in sig

Tom

790 without dbug, but running in IDE.

Radeon 9600 pro
Athlon (some number) equivalent to 2.7 GHz
768 megs of ram
Windows XP pro

around 32fps.

pentium 4 ,1.6 GHZ
rage pro vid card( 8Mb) he he
768 megs of ram
Windows XP pro

spot the weak link in my setup

hehe aye.

142 fps

AMD 500 Mhz
Geforce 2 MX
256 Mb Ram
Windows 98

320 fps (From IDE, no debug)

Pentium 4, 1.7Ghz
ATI Radeon 7500 Mobility
512 Mb RAM
W2k Server Pro

875fps (From IDE, no debug)

175fps.

805Mhz P3. 396Mb Bullet-time memory, Voodoo5. Aka, piece of crap.

I get 308 in debug mode, 242 not in debug mode. ?!?

1.0 GHz P3
640 MB RAM
Win 2000 Pro
GForce 2 32 Meg

57 Fps or 205200 Fph ;)
though, 89 Fps with no Quads at all :(

P4 2,5 Ghz, 512Mb, Intel 845 Gfxcard

Average 1246fps (from IDE no debug)
P4 2.4ghz, 512mb, GeforceFX5900

Almo, might want to restart ;)

Sweenie.. man... I'm sorry... really ^_^.

All of you with higher then 512. I hate you.

222 fps with radeon 9200se :/ Hey zawran - impressive speed!

582

ATI Radeon 8500 LE
Pentium 4c 2.4GHz

470ish w/o debug

2.2GHz P4M, ATI M9000

43 duron 1000 tnt 2

526 w/Debug
744 w/o Debug

AMD 2.8 GHz
1 GByte RAM
GeForce 4200 Ti

I just tried it again seeing that I was getting much higher number than most and I made sure I had less running in the background this time, but still it pretty much stayed between 1250fps and 1260fps running straight from the IDE.

P4, 2.4ghz, 512mb, GeforceFX5900

965 with debug OFF

600 with Debug ON

~460 with debug off. I don't think it should be a matter of concern with debug on, since that is most likely not the state a product will be released it.

Specs,
Windows XP Home
Pentium 4 2ghz (no special thingies)
GeForce 3 ti200 (AGP)
512mb ram

Uh... I don't know if there's anything else in particular you'd want to know about.

327

290 with ide & compiled, debug off

WindowsXP, AMD 1Ghz, GeForce 2Ti 64MB, 512MB ram.

245 with debug off
225 with debug on

duron 950 -ati 7200 /32meg- 256meg ram

windowsXP


Zmatrix

.

830 without debug
650 with debug

2.53 ghz
9800 radeon XT...256 Meggers

83 with debug, 112 without.

AMD Duron 1900+ 1.6GHz
nVidia GeForce 2 MX400, 32MB VRAM
512MB RAM
Windows XP Pro
DirectX 9.0

I get 812 with debug on. and 1065 with debug off.
My system specs are at the bottom

@ Ruz, I think you have your video sync set at 30 Hz.
You should be getting more with what you have.
@ sweenie, I think you have your video sync set at 60 hz.
You should be getting more as well.

1836 fps

P4-3.2 (running at 3.6)
gig of memory
Geforce FX 5950

Tracer

327 fps without debug.

AMD Athlon 1700XP, 256 Meg DDR ram, Geforce 4 MX

Tracer, you are truely an idol of tweakers.

And I have enough info on the subject now, thank you all :)

I'm gunning for you Tracer... Just wait til I get home. :)

about 1300fps

3.2Ghz P4
Radeon 9800XT
1gb ram